Guitar plastic truss rod cover

YOU ARE BUYING ONE TRUSS ROD COVER
PLEASE STATE WHICH ONE YOU REQUIRE FROM THE DROP DOWN MENU
TRC1. Three ply white bell type cover with straight edge with three screw holes. Flat bottom.
TRC2. Three ply black bell type cover with straight edge with three screw holes. Flat bottom.
TRC3. Two ply black bell type cover with beveled edge with three screw holes. Flat bottom.
TRC4. Three ply white bell type cover with straight edge with three screw holes. Shaped bottom.
TRC5. Three ply black bell type cover with straight edge with three screw holes. Shaped bottom.
TRC6. Two ply narrow black bell type cover with beveled edge with three screw holes. Flat bottom.

TRC10. Two ply narrow black bell type cover with beveled edge with two screw holes.
TRC11. Two ply narrow black bell type cover with beveled edge with two screw holes.
TRC12. Two ply small narrow black bell type cover with beveled edge with three screw holes. Flat bottom.

TRC1, TRC2, are 60mm high the base is 30mm wide the 2 lower screw holes are
18mm apart the top screw hole is 54mm from the base

TRC3 are 57mm high the base is 28mm wide the 2 lower screw holes are
18mm apart the top screw hole is 54mm from the base

TRC5 is 56mm high x 29mm wide and screw holes 17mm apart
Guitar truss rod rod cover plate, Black bell type cover

TRC6 is 56mm high x 29mm wide and screw holes 17mm apart at bottom
Guitar truss rod rod cover plate, Black bell type cover
Top screw hole is 50mm up from the bottom

TRC10 are 58mm high the base is 26mm wide
screw holes are 49mm apart

TRC11 are 53mm high the base is 32mm wide
screw holes are 42mm apart

TRC12 are 45mm high the base is 23mm wide the 2 lower screw holes are
13mm apart the top screw hole is 41mm from the base